Introdunction

A stainless steel pipe reducer fitting is a butt weld stainless steel reducer used to connect pipes of different diameters in a piping system. As an industrial stainless steel reducer with corrosion resistant stainless steel reducer properties, it is available in seamless stainless steel reducer construction (or welded). Two primary configurations are offered: concentric stainless steel reducer (for vertical or gravity flow lines where centerline alignment is critical) and eccentric stainless steel reducer (for horizontal piping to maintain a flat bottom or top, avoiding air or liquid accumulation). Manufactured to ASTM A403 and ASME B16.9, these reducers are supplied as concentric pipe reducer stainless steel or eccentric pipe reducer stainless steel in various material grades (304, 316L, duplex, etc.).

Stainless Steel Reducer Available Products and Standard

1. ASTM A403 / ASME SA403 

(Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings)

Type: 

• Stainless Steel Pipe Reducer Fitting

• Butt Weld Stainless Steel Reducer

• Seamless Stainless Steel Reducer

Size Range:

• NPS: 1/2″ – 48″ (DN15 – DN1200)

• Wall thickness: Schedule 5S, 10S, 20S, 40S, 80S, 160, XXS

• Connection: Butt weld ends (beveled for welding)

Surface: Solution annealed, Pickled, Passivated, Mechanically polished (optional)

Testing: Chemical analysis, tensile test, hardness test, flattening test (for welded reducers), hydrostatic test (optional), NDE (radiography or PT per ASME B16.34), PMI, dimensional inspection (per ASME B16.9)

2. ASME B16.9 / ASME B16.25

(Standard for Factory‑Made Wrought Butt‑Welding Fittings / End Preparation)

Type: 

• Industrial Stainless Steel Reducer

• Corrosion Resistant Stainless Steel Reducer

Size Range:

• NPS: 1/2″ – 48″ (DN15 – DN600 for B16.9; larger sizes by negotiation)

• Wall thickness matching pipe schedule on both ends

• End preparation: Beveled ends per ASME B16.25 (for butt welding)

Surface: As‑formed, Annealed, Pickled, Coated

Testing: Dimensional inspection (inlet/outlet ID and OD, overall length, concentricity/eccentric offset), hardness test (for duplex), NDE (MT/PT for surface defects), marking (material grade, heat number, size, schedule, standard)

Applications

(1)Pipeline – Stainless steel reducer for pipeline transmission systems connects different diameter pipe sections, enabling flow control and pressure management with concentric or eccentric options to suit terrain and flow conditions.

(2)Oil and gas – Stainless steel reducer for oil and gas facilities (wellheads, manifold stations, metering skids) provides smooth diameter transitions, with eccentric reducers preferred for horizontal gas/liquid separation to prevent liquid slugging.

(3)Chemical industry – Stainless steel reducer for chemical industry (reactor inlet/outlet, storage tank connections, blending lines) handles corrosive media, with seamless construction eliminating weld seam attack points.

(4)Water treatment – Stainless steel reducer for water treatment (pump suction/discharge, filter banks, reverse osmosis arrays) maintains system hydraulics, with concentric reducers used on vertical pump suction lines to avoid cavitation.

(5)Offshore – Stainless steel reducer for offshore platforms (subsea pipelines, topside process modules, riser systems) resists chloride corrosion and high pressure, with eccentric reducers preferred for horizontal seawater lines to maintain continuous flow.

MONO Group is one of Stainless Steel Reducer Manufacturer & Supplier & Wholesaler from China,We can supply ASTM / DIN / ISO / GB stndard high quality alloy plate, sheet, round bar, tube, pipes, fittings, flange, pls contact us freely for your RFQ to info@monokj.com